Release Notes for D26 6.3.17.2 (the same as D28 2.3.17.2 and D22 7.3.17.2)

1.Hangup tone can be configured via Web management "Phone -> Features -> BusyToneDelay".The default is set to be 0s.


2.The prompt tone for Voice Message can be configured via "Phone -> Tones -> Stutter".Make "Select country" as "Custom" and then fill in the blank of "Stutter" as "0" which will turn the voice off.In a CFG file,it is:
    [ Country ]
    path=/yealink/config/voip/tone.ini
    Country = Custom
    
    [ Tone Param ]
    path=/yealink/config/voip/tone.ini
    dial = 
    ring = 
    busy = 
    congestion = 
    callwaiting = 
    dialrecall = 
    record = 
    info = 
    stutter = 0
    message = 
    autoanswer = 

    [ Default ]
    path=/yealink/config/voip/tone.ini
    dial = 1
    ring = 1
    busy = 1
    congestion = 1
    callwaiting = 1
    dialrecall = 1
    record = 1
    info = 1
    stutter = 1
    message = 1
    autoanswer = 1


3.Enable dialing out Emergency NO. while the keypad is locked (locked as "talk call only").Specify the emergency NO. via web management "Phone -> Features -> Emergency"


4.two more options on "Check New Config":
    Power on + Repeatedly
    Power on + Weekly
    
    
5.Add setting options for Expansion Module on web management "Phone -> EXT key"