Posted by: support
on Nov 18, 2009
Tagged in: Untagged
This procedure applies to the following scenarios
- You just got your new UCA-FX08 and you have connected it to your network but you are not able to access the admin gui.
- You just reset the UCA-FX08 to factory default by pressing the reset button and you are not able to connect to the admin gui anymore.
Introduction
The UCA-FX08 is configured with the following default IP addresses when shipped from the factory. This is also true when you reset the UCA-FX08 to factory default.
WAN Interface
- IP Address: 192.168.0.100
- Subnet Mask: 255.255.255.0
- Default Gateway: 192.168.0.1
LAN Interface
- IP Address: 192.168.1.100
- Subnet Mask: 255.255.255.0
- Default Gateway: None
Your PC (we'll call it the "Admin PC" in this tutorial) needs to be in the same LAN as well as IP network as the UCA-FX08 in order to connect to the Admin GUI. This is especially true when you connect to the admin gui for the first time or when you have just factory reset the UCA-FX08 by pressing the reset button.
Posted by: support
on Nov 18, 2009
Tagged in: Untagged
You can find your phone's IP address in 2 easy steps. You need to be in front of the phone in order to do this.
01Locate the OK button on your phone which is located at the center of the navigation keys on the phone keypad as shown in the picture below.
02Press the OK button and the IP Address of the phone will be displayed on the LCD Screen.
Posted by: support
on Nov 18, 2009
Tagged in: Untagged
Summary
In order to load your logo image to your d28p phone, you need to first convert the logo into .dob format. You need an utility (PictureExDemo.exe) to convert your image to .dob format which is available under our download section as explained in the following steps. If your image is in .png or .jpg, .gif, etc format, you need to first convert the image to .bmp file using windows paint utility. Once you have converted your image to .bmp file, you'll then use PictureExDemo.exe utility to convert it into .dob file. You can then upload the .dob image to the phone.
Following is the step-by-step procedure to prepare your logo and then upload it to your D28P phone.
1Download tool required to change Logo
- Download the Tool from download section Utility to change LCD Logo Image
- Extract the zip file into a folder on your desktop called "logo_change"
2Prepare your Logo
